Installation Instructions

Push Open and Soft Closing Undermount Slide 1A88/1A88F

【Cabinet evaluation check】

(1)	Ensure that the difference for the cabinet internal width and drawer internal width is within the tolerance of 42mm-43mm.
‧	Ensure that the difference for the cabinet internal width and drawer internal width is within the tolerance of 49mm for the 1B88/1B88F Example: ‧ Cabinet internal width of 500mm with the corresponding drawer inner width of 457-458mm. ‧ 1B88/1B88F: cabinet internal width of 500mm with the corresponding drawer inner width of 451mm.
(2)	Cabinet internal width should be consistent.
(3)	The mid rail must not be curved.
(4)	The drawer must be in a perfect rectangular shape.
(5)	The drawer sub front must set tight against drawer front panel.

* Inconsistency of the cabinet internal width will cause negative effects on the push open function.

* Inaccurate drawer front installations will also result in negative effects to the push open function.

【Front View】

【Side View】

* Ensure the installation location or the cabinet is on a flat surface.

Inset front installation reference
X	18	19	20	21	22	23	24
Y	59	60	61	62	63	64	65
Z	26	27	28	29	30	31	32
L : Slide Length X : Drawer Front Thickness

【Drawer Installation Guide】

(1) Hole Drilling

(2) Locking Device Installation

【Cabinet Installation Instruction】

(1)	Identify the drawer base line and prepare drilling.
	* It is NOT recommended to screw the slides without pre-drilling as the sawdust might affect the functionality of the slides.

(2)	Ensure the pair of slides is installed leveled and symmetrical on both sides.
(3)	Insert the drawer until locking device clicks.

	* After inserting the drawer onto the slides, check if the slides need to be adjusted. Then the drawer front can be installed.

【Guidance of Fine Adjustments】
The adjustments are designed to fine-tune the slide functions. If the issues still persist after the adjustments, please reset to default setting and ensure each installation dimension is in accordance with the specification.

After the assembly is completed, please check the following list if the mechanism does not function properly.

【Post-installation Examination】
1	The cabinet and drawer must be in perfect rectangular shape. Ensure that they are not in diamond or trapezoid shape.
2	Ensure the side space, depth on both sides are consistent.
3	Ensure the installation position of slides and the cabinet body are flat and level.
4	Ensure the front release levers are installed correctly.
5	Ensure the drawer dimensions, rear notch locking holes, internal drawer width, and the drawer bottom recess are correct.

SIMPLEX- Silent Soft-Closing Undermount Slide 1A68/1B68
‧Ensure that the difference for the cabinet internal width and drawer internal width is within the tolerance of 42mm~43mm for the 1A68/1B68.

【Cabinet evaluation check】
(1)	Example: Cabinet internal width of 500mm with the corresponding drawer inner width of 457-458mm
(2)	Cabinet internal width should be consistent all the way out.
(3)	Drawer must be in perfect rectangular shape.

【Drawer installation guide】
(1)	Hole Drilling
(2)	Locking Device Installation

King Slide

Installation Instructions